Thickness Recommendation

Thickness Guide for Condensation Control

Recommended Thickness (mm) for Condensate, Chilled Water and Refrigeration Systems

Recommended Thickness (mm) for ducting

At Superlon condensation prevention is our utmost priority. As a safety to prevent condensation, calculated figures are based on dew point temperature adding +0.5˚C with an external surface coeffiecient of 9 W/M2-K. Thicknesses should be recalculated if there is any use of jacketing such as aluminium as the external surface coefficient will be changed.

Note: Recommended thicknesses are to be used as a guide. Results are obtained under typical conditions. Superlon does not guarantee it will be prevent condensation. Other factors such as proper installation is crucial in condensation prevention. Please consult with our technical staff for more precise calculations.

Comments are closed.